How Do I Disable Dynamic UCS in AutoCAD?

by

If you are an AutoCAD user, you might have come across the Dynamic UCS feature. While this feature can be useful in certain situations, there are times when you may want to disable it. In this tutorial, we will show you how to disable the Dynamic UCS in AutoCAD.

What is Dynamic UCS?

Dynamic UCS stands for Dynamic User Coordinate System. It is a feature in AutoCAD that allows you to automatically change the XY plane of the current viewport based on the geometry you are working with. This can be helpful when working with 3D objects and complex drawings.

However, there might be instances where the Dynamic UCS becomes more of a hindrance than a help. For example, if you prefer to work with a fixed XY plane or if the constant changes in the coordinate system are causing confusion, disabling the Dynamic UCS could improve your workflow.

Disabling Dynamic UCS

To disable the Dynamic UCS in AutoCAD, follow these steps:

  1. Method 1: Using the Status Bar

The easiest way to disable Dynamic UCS is by using the Status Bar at the bottom of the AutoCAD window. Here’s how:

  1. Look for a button on the Status Bar that resembles a square with gridlines.
  2. Click on this button to toggle off the Dynamic UCS.

Status Bar

  1. Method 2: Using Command Line

If you prefer using commands over buttons, you can also disable Dynamic UCS using the Command Line. Here’s how:

  1. Click on the Command Line at the bottom of the AutoCAD window.
  2. Type UCSFOLLOW and press Enter.
  3. Set the value of UCSFOLLOW to 0.

Troubleshooting

If you have followed the above steps and Dynamic UCS is still not disabled, try the following troubleshooting tips:

  • Check for other UCS-related commands: Some customizations or plugins may override the default behavior of Dynamic UCS. Check if there are any other commands or settings affecting UCS behavior and disable them if necessary.
  • Restart AutoCAD: Sometimes, a simple restart can resolve any temporary issues with Dynamic UCS.
  • Contact Autodesk Support: If none of the above solutions work, consider reaching out to Autodesk Support for further assistance.

By following these steps, you should be able to disable Dynamic UCS in AutoCAD. Remember that you can always re-enable it if needed by following a similar process. Happy CADing!

Note: Screenshots and instructions are based on AutoCAD version XYZ. The interface may vary slightly in different versions, but the general concepts remain the same.