How Do You Center a Line Between Two Lines in AutoCAD?

by

In AutoCAD, you can easily center a line between two lines using a simple command. This can be very useful when you want to create symmetrical designs or align elements in your drawing. Let’s take a look at how you can achieve this.

Step 1: Select the lines

To begin, select the two lines between which you want to center the new line. You can use the selection tools or simply click on each line individually while holding down the Shift key to select multiple objects.

Step 2: Access the Modify menu

Once the lines are selected, go to the Modify menu located at the top of your AutoCAD window.

Step 3: Use the Center Between Two Lines command

Within the Modify menu, locate and click on the “Center Between Two Lines” command. Alternatively, you can also type “CEN” in the command line and press Enter.

Step 4: Specify insert point

After activating the command, AutoCAD will prompt you to specify an insert point for the new center line. Simply click on any point between the two selected lines where you want to place it.

Step 5: Adjust properties (optional)

If needed, you can adjust various properties of the center line such as its length, angle, and offset from one of the selected lines. To do this, follow the prompts in AutoCAD’s command line or use dynamic input fields that appear near your cursor.

Note: The options available for adjusting properties may vary depending on your version of AutoCAD or any installed plugins/extensions.

Tips:

  • If you need to move or modify the center line after creating it, you can use AutoCAD’s standard editing commands like Move, Rotate, or Stretch.
  • To create multiple center lines between the same two lines, simply repeat the process outlined above.
  • If your drawing contains complex geometry or non-linear lines, you may need to use additional tools or methods to achieve the desired center line placement.

By following these steps, you can easily center a line between two lines in AutoCAD. This feature allows for precise alignment and symmetry in your drawings. Experiment with different placement points and properties to achieve the desired results.