Are you working on a project in AutoCAD and need to change the units from inches to centimeters? Look no further! In this tutorial, we will guide you through the step-by-step process of changing the AutoCAD units to suit your needs.
Step 1: Accessing the Drawing Units
To begin, open your AutoCAD software and navigate to the “Drawing Utilities” section. Here, you will find the “Units” command, which allows you to modify various unit settings.
Step 2: Opening the Units Dialog Box
Click on the “Units” command, and a dialog box will appear on your screen. This dialog box is where all the unit-related settings are located.
Changing Linear Units
The first setting we’ll modify is the linear unit. By default, AutoCAD uses inches as its primary linear unit. To change it to centimeters:
- Select “Length” from the left panel of the Units dialog box.
- In the “Length Type” dropdown menu, choose “Decimal”.
- In the box next to “Precision,” select an appropriate value (e.g., 0.01) for accurate measurements in centimeters.
- Select “Centimeters” from the “Insertion Scale” dropdown menu.
Your linear units are now set to centimeters!
Changing Angular Units
In addition to linear units, AutoCAD also allows you to modify angular units if necessary. Follow these steps:
- Select “Angles” from the left panel of the Units dialog box.
- Choose the desired unit from the “Angle Type” dropdown menu (e., “Decimal Degrees”, “Degrees Minutes Seconds”, etc.).
Now, your angular units are also adjusted according to your preference.
Step 3: Applying the Changes
After adjusting the unit settings, click on the “OK” button at the bottom of the Units dialog box to save and apply the changes. AutoCAD will now use centimeters as the default unit for all measurements.
It’s important to note that changing the unit settings in AutoCAD only affects future drawings. If you want to modify existing drawings, you will need to scale them accordingly using additional commands or tools.
Conclusion
In this tutorial, we learned how to change AutoCAD units from inches to centimeters. By following these simple steps, you can customize your unit settings and work more efficiently on your projects.
Remember to always choose appropriate precision values for accurate measurements. Now go ahead and start designing in centimeters with AutoCAD!