In AutoCAD, the Chamfer command is used to create a beveled edge between two lines or objects. It helps in smoothing corners and creating more aesthetically pleasing designs. To speed up your workflow, AutoCAD provides shortcut keys for various commands, including the Chamfer command.
Shortcut Key for Chamfer Command
The shortcut key for the Chamfer command in AutoCAD is CH. By pressing “CH” on your keyboard, you can quickly access the Chamfer command without having to navigate through menus and ribbons.
The Chamfer command allows you to specify a distance or an angle for the bevel. It can be accessed using either the shortcut key or by clicking on the “Chamfer” icon in the Modify panel of the Home tab.
Using the Chamfer Command
To use the Chamfer command, follow these steps:
- Select the two lines or objects that you want to chamfer. You can select them by clicking on them individually or by using a selection window.
- Once selected, press “CH” on your keyboard or click on the “Chamfer” icon in the Modify panel to activate the command.
- AutoCAD will prompt you to specify a distance or an angle for the chamfer.
You can either enter a specific distance/angle value or use dynamic input to visually specify it.
- After entering the value, press Enter to apply the chamfer. The selected lines/objects will now have a beveled edge according to your specified parameters.
Tips and Tricks
- If you want to chamfer multiple corners with the same distance/angle, you can use the Multiple option. After selecting the first set of lines/objects, simply press Enter without entering any value.
AutoCAD will remember your previous chamfer parameters and apply them to subsequent corners until you exit the command.
- If you need to change the chamfer distance/angle after applying it, you can use the Edit Chamfer command. Simply type “CHAMFEREDIT” in the command line or access it through the ribbon.
- To remove a chamfer and restore the original corner, use the Undo command immediately after applying the chamfer.
By utilizing the shortcut key for the Chamfer command in AutoCAD, you can significantly improve your productivity and speed up your design process. Remember to experiment with different values and techniques to achieve the desired results.
Conclusion:
In conclusion, the shortcut key for the Chamfer command in AutoCAD is “CH”. This command allows you to quickly create beveled edges between two lines or objects. By using this shortcut key, along with other tips and tricks mentioned above, you can enhance your efficiency and create more polished designs in AutoCAD.