# How Do You Make a Parallel Plane in SolidWorks?

Creating a parallel plane in SolidWorks is a useful technique that allows you to model complex parts and assemblies with ease. In this tutorial, we will explore the step-by-step process of creating a parallel plane in SolidWorks and discuss some tips and tricks along the way.

## Step 1: Open a New Part

To start, open SolidWorks and create a new part document. You can do this by clicking on “File” in the menu bar, followed by “New” and then “Part”.

## Step 2: Sketch the Base Plane

The first step in creating a parallel plane is to sketch the base plane. This will serve as our reference point for creating the parallel plane. To do this, click on “Sketch” in the toolbar and select the desired sketching plane from the available options.

Tip: You can choose any of the default planes (Front, Top, Right) or create your own custom planes using reference geometry tools.

## Step 3: Create a Reference Line

Next, we need to create a reference line on the base plane. This line will define the orientation of our parallel plane. To do this, select the “Line” tool from the sketching toolbar and draw a line on the base plane.

Tip: You can use other sketching tools like arcs or splines to create more complex reference lines if needed.

## Step 4: Define Offset Distance

Now that we have our reference line, it’s time to define the offset distance for our parallel plane. To do this, click on “Features” in the toolbar, followed by “Offset Surface”. In the offset surface dialog box, select your reference line and enter the desired offset distance.

Tip: You can choose positive or negative offset values to create parallel planes on either side of the reference line.

## Step 5: Confirm and Create

Finally, we need to confirm our settings and create the parallel plane. Double-check the preview of the offset surface in the dialog box and click “OK” to create the parallel plane.

Tip: You can adjust the position and orientation of the parallel plane by editing the reference line or changing the offset distance in the feature manager design tree.

## Conclusion

Congratulations! You have successfully created a parallel plane in SolidWorks. This technique will undoubtedly enhance your modeling capabilities, allowing you to design more complex parts and assemblies with ease.

In summary, here are the steps to create a parallel plane in SolidWorks:

• Create a new part document
• Sketch the base plane
• Create a reference line on the base plane
• Define the offset distance for your parallel plane
• Confirm and create the parallel plane

In conclusion, mastering this technique will open up a world of possibilities in your SolidWorks designs. So go ahead, experiment, and unleash your creativity!